Design Engineering CryO2 Tank and Installation Kit Available WITH CryO2 AIR INTAKE BULB!
Product Description
The foundation to every CryO² System. Must have this kit to utilize CryO² components. The kit includes a 5 or 10 pound Co² tank, cryogenic solenoid valve, all necessary fittings, 14 ft. stainless steel hose, full wide open switch, arming switch, and wiring kit. Only one kit is needed to operate all the CryO² components.
THIS KIT ALSO IS AVAILABLE WITH THE CryO2 Cryogenic Air Intake select it as an option!
The CryO² Air Intake consists of an aerodynamically designed bulb with a cryogenic chamber which is mounted in a 3" segment of air tube. The air passes over the bulb, heat is removed from the air charge resulting in a colder, denser, more powerful charge. Dyno testing showed a reduction in intake air temperature of more than 50 degrees. The CryO² Air Intake can be used on turbocharged, supercharged or naturally aspirated applications. Multiple units can be used for colder results. Installs in minutes and comes with silicone connection sleeve, hose clamps and connection / vent hose.
INTERCOOLER/ AFTERCOOLER SPRAYER
The CryO² Intercooler Sprayer mounts directly to the front of the intercooler or aftercooler and vents the liquid Co² directly onto the cooling fins, thus enhancing the performance of the intercooler by more than 50%. This component must always be the last in the CryO² system as it vents the liquid Co² charge.
choose between 5 or 10 lbs bottle.
Simmons Motorsports Group 60C Mellen St. Hopedale, MA 01747
